Setback Requirements for the RS-7.5 Residential District in Concord
Jurisdiction: Concord•Code Version: February 10, 2026
The RS-7.5 Single-Family Residential District in the City of Concord maintains specific minimum setback requirements for single-family residential structures. These standards are measured from the property line or the back of the sidewalk, whichever is less, to the face of the building or structure [Section 18.30.030].
Minimum Setback Standards for RS-7.5 Districts
The following table details the minimum setback distances required for single-family residences within the RS-7.5 Residential District.
| Setback Type | Minimum Distance |
|---|---|
| Front | 20 feet |
| Interior Side | 5, 10 feet |
| Aggregate Side | 15 feet |
| Corner Side | 10 feet |
| Rear | 20 feet |
Note: Interior side setbacks are listed as "5, 10 feet" [Table 18.30.030].
Important Regulations Regarding Setbacks
Measurement and Application
All setbacks in the RS-7.5 Residential District are measured from the property line or the back of the sidewalk (whichever is less) to the face of the building or structure [Section 18.30.030].
Exceptions and Adjustments
- Projections: Certain architectural features may project into required setbacks, subject to the limitations specified in the development code [Section 18.150.140].
- Front Setback Averaging: In areas where existing development has front setbacks less than the 20-foot requirement, the minimum front yard setback for the RS-7.5 Residential District may be reduced based on the average depth of existing improved lots on the same block [Section 18.150.140].
- Minor Exceptions: The review authority may grant a minor exception to adjust these requirements by up to 25 percent for specific rear setbacks or through other established minor exception procedures [Section 18.425.020, Table 18.425.020].
- Nonresidential Uses: For nonresidential development within an RS-7.5 district, setbacks are established through the applicable permit process, provided they are consistent with abutting district regulations [Section 18.30.030].
Sections Cited
- Section 18.30.030: RR and RS districts – Development standards
- Section 18.150.140: Setbacks
- Section 18.425.020: Applicability (Minor Exceptions)