Minimum Lot Size and Dimensions in RS-8: Single-Family Residential
Jurisdiction: Concord•Code Version: February 10, 2026
In the RS-8 Single-Family Residential district of the City of Concord, the minimum lot area is 8,000 square feet, the minimum lot width is 80 feet, and the minimum lot depth is 85 feet. These requirements apply to single-family residential development within the RS-8 zoning district.
Lot Size and Dimension Standards for RS-8
The following table outlines the minimum dimensions for lots zoned RS-8 in the City of Concord for single-family residential use [Section 18.30.030].
| Standard | RS-8 Residential Requirement |
|---|---|
| Minimum Lot Area | 8,000 square feet |
| Minimum Lot Width | 80 feet |
| Minimum Lot Depth | 85 feet |
Development Standards for RS-8
Beyond lot dimensions, development within the RS-8 district must comply with specific standards regarding lot coverage, building height, and setbacks [Section 18.30.030].
| Development Standard | RS-8 Residential Requirement |
|---|---|
| Maximum Lot Coverage | 35 percent |
| Maximum Building Height | 30 feet |
| Minimum Front Setback | 20 feet |
| Minimum Interior Side Setback | 5, 10 feet |
| Aggregate Side Setback | 15 feet |
| Minimum Corner Side Setback | 10 feet |
| Minimum Rear Setback | 20 feet |
Applicability and Rules of Measurement
- Measurement: Setbacks are measured from the property line or the back of the sidewalk, whichever is less, to the face of the building or structure [Section 18.30.030].
- General Plan Consistency: The RS-8 district is consistent with and implements the low-density residential (LDR) land use designation of the Concord general plan [Section 18.30.010].
- Additional Requirements: These standards are subject to provisions in Division IV (Development Standards) and Division V (Standards for Specific Uses) of the Concord Municipal Code [Section 18.30.030].
Sections Cited
- Section 18.30.010: Purpose
- Section 18.30.030: Table 18.30.030 – RR and RS districts – Development standards