CO: Community Office District Development Standards in Concord
In the Community Office (CO) district of the City of Concord, the maximum permitted Floor Area Ratio (FAR) is 1.0. The maximum allowable lot coverage for the CO: Community Office district is established through the permit process, ensuring development aligns with the site-specific conditions and the requirements of any adjacent zoning districts.
CO: Community Office District Development Standards
The CO: Community Office district is intended for a mix of small-scale single and multi-tenant businesses, professional services, and medical offices in low-rise buildings that remain compatible with adjacent residential areas [Section 18.40.010].
Building Intensity and Coverage
Development intensity in the CO: Community Office district is regulated by a Floor Area Ratio (FAR) limit and site-specific lot coverage determinations.
| Standard | CO: Community Office Requirement |
|---|---|
| Maximum FAR | 1.0 |
| Lot Coverage (Maximum) | Established via permit process |
Note: For nonresidential lot coverage in the CO: Community Office district, if a permit does not regulate this feature or if no permit is required, the regulations of the abutting district apply to each adjacent portion of the property [Section 18.40.030].
Development Metrics for CO: Community Office
Beyond intensity, other key development standards for the CO: Community Office district include:
| Metric | CO: Community Office Standard |
|---|---|
| Minimum Lot Area | 10,000 square feet |
| Minimum Lot Width | 100 feet |
| Minimum Lot Depth | 100 feet |
| Maximum Building Height | 30 feet |
Reduced dimensions may be allowed in the CO: Community Office district subject to use permit approval [Section 18.40.030].
Setback Requirements
The CO: Community Office district requires specific setbacks to manage site transitions and ensure compatibility with surrounding uses.
| Setback Type | CO: Community Office Minimum |
|---|---|
| Front | 10 feet |
| Corner Side | 10 feet |
| Interior Side/Rear | 5 feet |
Note: Reduced setbacks may be allowed in the CO: Community Office district subject to use permit approval. Furthermore, no interior side or rear setbacks are required unless the site is adjacent to an R district or a residential use in CMX [Section 18.40.030].
Sections Cited
- Section 18.40.010: Purpose (Office and Commercial Districts)
- Section 18.40.030: Table 18.40.030 – Office and commercial districts – Development standards